6 Series E64 645Ci (N62) CONVER
Check connecting-rod bearing clearance:
Piston in BDC position.
Fit special tool 00 2 590 (Plastigage Type PG 1) to the oil-free
crankshaft.
Fit bearing caps so that pair numbers match up.
Important!
Do not distort conrods or crankshaft.
Use conrod bolts to check conrod bearing clearance.
Tighten down conrod bolts with special tool 00 9 120 or special
tool 11 2 110.
Tightening torque 11 24 1AZ
.
Remove bearing cap and read off bearing play at width of
flattened plastic thread with assistance of measurement scale.
Conrod bearing clearance.
-
Remove plastic thread.
-
Lubricate crankshaft and bearing shells.
-
Install new conrod bolts.
Tighten down conrod bolts with special tool 00 9 120 or special
tool 11 2 110.
Tightening torque 11 24 1AZ
.
RA Replacing all conrod bearings (N62/N62TU)
BMW AG - TIS
04.02.2013 04:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -