6 Series E64 645Ci (N62) CONVER
11 31 071
Checking camshaft timing on right side
(N62/N62TU)
Special tools required:
•
11 9 190
•
11 9 461
•
11 9 462
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Remove servomotor fro right eccentric shaft
•
Remove right cylinder head cover
•
Remove all spark plugs on cylinder bank 1 to 4
•
If necessary, remove fan cowl
Important!
Screw (1) is a special screw and must not be replaced with a
normal M8 screw.
Release screw (1).
Unclip oil line (3) from retainers (2) and remove.
Crank engine at central bolt in direction of rotation to firing TDC
position of 1st cylinder.
Note:
In firing TDC position, cam of exhaust camshaft at 1st cylinder
points upwards at an angle.
Cam of inlet camshaft points downwards at an angle:
RA Checking camshaft timing on right side (N62/N62TU)
BMW AG - TIS
04.02.2013 04:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -