6 Series E64 645Ci (N62) CONVER
E65/N62 only:
Release screws.
Remove transmission underguard (1).
Remove left oxygen sensor.
E60/ E63/ E64, N62 only:
Remove rear underbody protection.
Remove left oxygen sensor (N62 only).
Note:
Version 1:
Unfasten nut.
Remove cable (1).
Installation:
Adjusting cable:
-
Release nut
-
Adjust cable by means of holder (2)
Distance A
≥
1 mm.
Note:
Version 2:
Grip clamping sleeve (1) and slacken nut (2).
Tightening torque 25 16 2AZ .
Detach retainer (3) towards bottom using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever.
Note:
Version 3:
Release shift cable head (2) from ball head.
Installation:
Adjust selector lever.
Illustration similar.
RA Replacing selector shaft seal (GA6HP26Z/6HP32Z)
BMW AG - TIS
04.02.2013 07:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -