6 Series E64 645Ci (N62) CONVER
32 41 351
Replacing return line for power steering (N62,
N62TU)
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Observe country-specific waste-disposal regulations
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove intake filter housing
•
Remove front underbody protection
•
Partially remove steering gear cover
Release quick-connect coupling and seal cooling coil connection
with a suitable plug.
Installation:
Make sure return line is laid without tension and with sufficient
spacing to adjoining components.
RA Replacing return line for power steering (N62, N62TU)
BMW AG - TIS
04.02.2013 08:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -