6 Series E64 645Ci (N62) CONVER
34 33 071
Replacing vacuum hose for brake booster
(N62)
Necessary preliminary tasks:
•
Read and comply with General Information.
•
Remove lower section of microfilter housing.
•
Remove acoustic cover.
•
Remove intake filter housing.
•
Remove air intake hose with air-mass sensor.
Important!
Before starting work, press the brake pedal to the floor several
times to reduce the vacuum pressure in the brake booster.
This makes it easier to remove the PA pipe.
Non-return valve and PA pipe are welded together and are
replaced together as a single unit.
Detach non-return valve (1) from brake booster.
Unclip vacuum line from fixture (1).
Unfasten hose clip (2).
Installation:
Replace hose clip.
RA Replacing vacuum hose for brake booster (N62)
BMW AG - TIS
04.02.2013 09:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -