6 Series E64 645Ci (N62) CONVER
Release mucket (1) in area of instrument panel trim (5).
Release screws (2) and (3).
Unscrew nuts (4).
Pull back trim for instrument panel (5) and remove.
Installation:
Make sure guides (1) of instrument panel trim (2) are correctly
seated in mountings.
Make sure seals are correctly seated on air ducts.
If necessary, detach right fresh-air grill to facilitate fitting of
associated air duct.
RA Removing and installing instrument panel trim
BMW AG - TIS
04.02.2013 12:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -