6 Series E64 645Ci (N62) CONVER
51 46 050
Removing and installing/replacing top trim on
rear apron
Necessary preliminary tasks:
•
Remove luggage compartment floor trim (luggage
compartment mat).
Release protective caps (1) and screws underneath.
Lever out expander rivets (2).
Lever out trim (3) inwards/upwards.
Installation:
Replace damaged protective caps (1) and expander rivets (2).
Make sure rear lid seal is correctly seated.
Installation:
Guides (1) of trim (2) must not be damaged.
RA Removing and installing/replacing top trim on rear apron
BMW AG - TIS
04.02.2013 12:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -