6 Series E64 645Ci (N62) CONVER
51 47 440
Removing and installing/replacing rear carpet
on seat pan
Necessary preliminary tasks:
•
Remove left/right front seat
•
Remove handbrake lever
•
Remove vehicle centre sensor
•
Remove rear left/right side trim
•
Remove front inside entrance cover strip
Disconnect connector (1).
Lay cable (2) back.
Feed out cables (3 and 4) through carpet (5).
Remove carpet (5).
Installation:
Make sure openings for air duct and attachment points are
correctly positioned.
Make sure all cables are in correct position.
RA Removing and installing/replacing rear carpet on seat pan
BMW AG - TIS
04.02.2013 12:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -