6 Series E64 645Ci (N62) CONVER
51 49 000
Removing and installing or replacing trim for
rear lid
Necessary preliminary tasks:
•
Open rear lid.
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Version with manual rear lid unlocking:
Detach handle (1) from clip (2).
Disconnect Bowden cable (3) from handle (1).
Installation:
Guide Bowden cable (3) through clip (2) and connect correctly in
handle (1).
Version with automatic rear lid unlocking:
Release expansion rivets (1) and clip (2).
Remove trim (3).
Installation:
Replace damaged clips (1 and 2).
RA Removing and installing or replacing trim for rear lid
BMW AG - TIS
04.02.2013 12:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -