6 Series E64 645Ci (N62) CONVER
61 31 023
Removing and installing/replacing Start/Stop
switch
Special tools required:
•
00 9 340
Attach special tool 00 9 340 as illustrated.
Unclip Start/Stop switch (1) with associated ribbon cable.
Important!
Carefully unlock and disconnect associated plug connection
for ribbon cable.
Replace the ribbon cable if damaged.
Remove Start/Stop switch (1).
RA Removing and installing/replacing Start/Stop switch
BMW AG - TIS
04.02.2013 14:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -