6 Series E64 645Ci (N62) CONVER
65 83 600
Replacing HIP module for Car Communication
Computer
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove Car Communication Computer
Release screws (1).
Remove cover (2) towards top.
Important!
Contact spring strip (3) on floor pan (2) must not be bent:
otherwise risk of short-circuiting!
When reinstalling floor pan (2), make sure individual springs
of contact spring strip (3) are correctly seated.
Press catches (1) and feed out HIP module (2) in direction of
arrow.
Installation:
Make sure front guides (3) of HIP module (2) are correctly
seated.
RA Replacing HIP module for Car Communication Computer
BMW AG - TIS
04.02.2013 20:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -