6 Series E64 650i (N62TU) CONVER
11 28 050
Replacing A/C compressor drive belt (N62)
Special tools required:
•
64 1 040
Necessary preliminary tasks:
•
Remove alternator drive belt.
•
Remove engine splash guard.
Installation:
If reusing the drive belt, mark the direction of rotation and reinstall
in the same direction.
Check drive belt for coolant and oil residues, replace if necessary.
Important!
If contaminated with hydraulic fluid: Replace drive belt.
Rotate engine at central bolt in direction of engine rotation.
At the same time, pull off drive belt (1) towards front in direction
of arrow using a clean cloth (2).
Remove drive belt (1) towards front.
RA Replacing A/C compressor drive belt (N62)
BMW AG - TIS
05.02.2013 15:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -