6 Series E64 650i (N62TU) CONVER
12 52 005
Removing and installing/replacing integrated
supply module (N62, N62TU)
Necessary preliminary tasks:
•
Read out fault memory with MoDiC or BMW DIS; if
necessary, work through test schedules
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
Disconnect battery
•
Remove right fresh air duct
Important!
Follow instructions for removing and installing control units
Unlock stopper (1) in direction of arrow.
Unfasten screws.
Lift out cover (2).
Unlock and detach plug connections on supply module.
Unlock supply module (1) and remove towards top.
RA Removing and installing/replacing integrated supply module (N62, N62TU)
BMW AG - TIS
05.02.2013 15:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
