6 Series E64 650i (N62TU) CONVER
12 41 020
Removing and installing/replacing starter
motor (N62, N62TU)
Necessary preliminary tasks:
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
Disconnect battery negative lead and cover
•
Remove reinforcement plate
•
E60/E63/64/E65/E66 only: Remove right exhaust manifold
Release screw and nut.
Remove heat shield (1).
Unfasten nut.
Tightening torque 12 41 4AZ
.
Unlock plug (1) and remove.
Release screws and pull starter motor out of transmission
mounting and remove.
Tightening torque 12 41 1AZ
.
RA Removing and installing/replacing starter motor (N62, N62TU)
BMW AG - TIS
05.02.2013 16:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -