6 Series E64 650i (N62TU) CONVER
41 11 513
Replacing cover for left frame side member
(door pillar and rear side panel removed)
Read contents of Body, General.
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 11 513).
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Side frame, outer
-
(2) Reinforcement, B-pillar, inner
-
(3) Water collecting box
Open weld joints in areas (1).
Installation:
Apply window glass adhesive to cavity acoustic baffle (2).
Open weld joints in area (1).
Installation:
Apply window glass adhesive to cavity acoustic baffle (2).
RA Replacing cover for left frame side member (door pillar and rear side panel remo
BMW AG - TIS
05.02.2013 21:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -