6 Series E64 650i (N62TU) CONVER
Installation:
Catches (1) and guide (2) on trim (3) must not be damaged.
Release screws (1) on bumper trim (2).
Release screws (1) on wheel arch trim (2).
Important!
To avoid damage, unclip the bumper trim (1) in direction of
travel.
Pull bumper trim (1) in direction of arrow off side guide.
RA Removing and installing front bumper trim
BMW AG - TIS
05.02.2013 21:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -