6 Series E64 650i (N62TU) CONVER
Tools for cutting through adhesive bead:
Type
Type
Order/part number
Special cutter (manufacturer: Fein)
with oscillating blade
Pneumatically operated
Electrically operated
81 43 9 429 183
81 43 9 427 786
BMW blade set
All required blades
81 43 9 428 596
Blade (U-shape)
19.5 mm *
24 mm
36 mm
45 mm
6 39 03 118 01 3
6 39 03 076 01 6
6 39 03 079 01 2
6 39 03 154 01 0
Blade (straight with stop roller)
16 to 35 mm (adjustable)
10 mm (fixed)*
14 mm (fixed)
6 39 03 143 01 3
6 39 03 189 01 0
6 39 03 082 01 6
"Roll Out 2000"
Wire cutting system *
81 62 0 301 76 8
Scalpel
for heavy-duty applications *
Handles for cutting wire
Self-locking *
special tool 51 3 270
* not included in BMW blade set
Storage temperature:
Storage temperature of all adhesive products of 5
°
C to 25
°
C must be observed.
Adhesive:
The BMW-approved 1-component polyurethane adhesive must be used for bonding.
-
Adhesive cartridge* (part number 83 19 0 152 031)
* Sourcing reference: BMW Parts Service
Adhesive is applied to window glass with cartridge gun (pneumatically or electrically operated, sourcing reference:
BMW Workshop Equipment and Planning Documentation).
When using accelerator (hot processing):
-
Temperature (min. 80
±
5
°
C) of cartridge oven must be checked every morning. Connect temperature sensor to
DIS (Diagnosis and Information System), if necessary in conjunction with MIB (Measurement Interface Box)
-
Heat adhesive for at least 1 hour in cartridge oven (sourcing reference: BMW Parts Service) to 80
±
5
°
C
-
Write date and time on adhesive when inserting into cartridge oven
-
Insufficient heating (< 1 hour) results in the formation of bubbles/blisters (gluing/cementing not permitted)
-
Temperature < 80
±
5
°
C results in the formation of bubbles/blisters (gluing/cementing not permitted)
-
Remove cured adhesive prior to further processing.
-
Mistake in mixing in event of an interruption in application >1 minute (gluing/cementing not permitted)
-
A test bead of 50...70 mm must be rejected after an interruption in application
-
Best before dates of accelerator and adhesive must not be more than 3 months apart
RA Instructions on gluing windscreen
BMW AG - TIS
05.02.2013 22:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -