bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing_replacing Rear Water Gutter Trim (rear Lid) On Left Or R > < 8 RA Removing And Installing_replacing Front Left Or Right Structural Tension Strut
Page 1
background image

51 71 385

Removing and installing/replacing rear middle
water gutter trim (rear lid)

Open luggage compartment.

Release clips (1).

Pull off rubber seal (2).

Close luggage compartment.

Open convertible top compartment cover.

Pull off rubber seal (1).

Remove trim (2).

Important!

If clip mountings are removed during further operations
(e.g. painting), always replace these mounting to ensure
watertightness.

RA  Removing and installing/replacing rear middle water gutter trim (rear lid)

BMW AG - TIS

05.02.2013  23:13

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing_replacing Rear Water Gutter Trim (rear Lid) On Left Or R > < 8 RA Removing And Installing_replacing Front Left Or Right Structural Tension Strut