6 Series E64 650i (N62TU) CONVER
Release screws (1) and feed out refrigerant lines (2).
Tightening torque 64 53 6AZ
.
Release screw (1) and disconnect refrigerant lines.
Replace all sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 6AZ
.
Important!
Secure compressor (2) against falling out.
Disconnect plug connection (1).
Release screw and nut (3).
Release bolts (4), remove bracket for oil lines (5) and feed out
compressor (2) with refrigerant lines downwards.
Tightening torque 64 52 3AZ
.
Adapter sleeves (1) must not be damaged.
Replace damaged adapter sleeves.
RA Replacing A/C system compressor (N62, with Dynamic Drive)
BMW AG - TIS
06.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
