6 Series E64 650i (N62TU) CONVER
Note:
Secure drive for backrest angle adjustment (2) against falling out.
Release screws (1) and remove drive for backrest angle
adjustment (2) in direction of arrow.
If necessary, remove inner drive shaft from drive for backrest
angle adjustment (2).
Installation:
Ensure drive for backrest angle adjustment (2) is correctly seated
on inner flange.
Installation:
Ensure drive shaft (1) is correctly seated in drive for backrest
angle adjustment (2).
RA Removing and installing/replacing drive for backrest angle adjustment (front sea
BMW AG - TIS
06.02.2013 03:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -