6 Series E64 M6 (S85) CONVER
Release cable tie (1).
Release screw (2).
Tightening torque 23 41 26AZ
.
Installation:
Use high-temperature-resistant cable ties (approx. 140
°
).
Unclip oxygen sensor plugs (1).
Release nut (2) and remove holder (3).
Unclip return line (1) from holder and place to one side.
Unlock and disconnect plug (2).
Important!
Risk of damage!
Adhere to conditions of absolute cleanliness when carrying
out the following tasks.
RA Replacing electric motor on hydraulic pump (GS7S47BG SMG)
BMW AG - TIS
07.02.2013 03:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
