6 Series E64 M6 (S85) CONVER
Tension strut, front left/right:
Unclip cover (1).
Release screws (2) and remove tension strut (3).
Installation:
Replace screws (2).
Tightening torques 51 61 4AZ
.
Tension strut, rear left/right:
Release screws (1) and remove tension strut (2).
Installation:
Replace screws (1).
Tightening torques 51 61 5AZ
.
RA Removing and installing/replacing all reinforcement struts on rear axle (M5, M6)
BMW AG - TIS
07.02.2013 09:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -