7 Series E32 740iL (M60-2) SAL
Release cylinder-head bolts in sequence 10 ... 1.
Lift off cylinder head.
Installation
Installation of cylinder head is described separately from removal.
The assembly sequence for removal and installation is different.
Clean sealing faces of cylinder head and engine block, if
necessary using wooden scraper to remove gasket debris. Ensure
that no gasket debris drops into the oil and coolant ducts.
Threaded bores in engine block must be free of dirt and oil (risk of
cracking).
Coat contact surface between engine block and timing case cover
with Hylomar SQ 32 M (refer to BMW Parts Service).
Check that dowel sleeves are undamaged and correctly located.
Place new cylinder head gasket in position.
RA Removing and installing left cylinder head (M60)
BMW AG - TIS
06.02.2013 08:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -