7 Series E38 730d (M57) SAL
Secure lever in with a drill (
∅
3 ... 4 mm ). When doing so, do not
move lever over dead center position in direction for " lowering".
Tighten control rod joint in long slot of lever, ensuring that ball stud
is located correctly on lever.
If necessary, check and correct position of lever on stabilizer.
Remove drill.
RA Adjusting vehicle height setting
BMW AG - TIS
03.02.2013 07:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -