7 Series E38 730i (M60-1) SAL
VK-23/Hillemeier
Baugruppe/Group: 11
11 02 96 (044)
weltweit
all countries
02/1996
Modified crankshaft bearing mountings
M60
Situation:
Conversion of the crankshaft bearing mountings from:
1.
M10 bolts with "hexagonal head" to M11 bolts with "Torx-type head"
2.
Revised angle of rotation for tightening purposes
Affected
vehicles:
M60
Period of manufacture: October 1995 to the end of series production
Procedure:
If the crankshaft bearing mountings have to be unfastened during the course of a repair -
and should the bearing caps be fastened with M11 bolts with "Torx-type head" - it is
essential you take into account the revised tightening angle (the same procedure as used
on the M62).
Tightening sequence:
M10 hexagonal head
M 11 Torx-type head
1. Tightening torque:
20 Nm
20 Nm
2. Angle of rotation:
70
°°°°
100
°
SI Modified crankshaft bearing mountings M60
BMW AG - TIS
04.02.2013 05:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -