7 Series E38 735i (M62) SAL
11 14 080
Removing and installing timing case cover,
top left (M62 up to 9/98)
Remove left cylinder head cover. These tasks are
described in the work step Removing and installing/sealing
both cylinder head covers,
refer to 11 12 004.
Remove fan clutch with impeller,
refer to 11 52 020.
Unfasten timing case cover.
Remove rubber sealing strip.
Installation:
Clean groove for rubber profile seal and sealing surfaces of
remains of seal.
Installation:
Keep sealing faces clean and free of oil.
Apply coat of Drei Bond 1209 to joint between cylinder head
and lower timing case cover (refer to BMW Parts Service).
RA Removing and installing timing case cover, top left (M62 up to 9/98)
BMW AG - TIS
07.02.2013 00:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
