7 Series E38 735iL (M62) SAL
Remove main bearing caps 1 to 5.
Lever out crankshaft.
Caution!
Note grinding stage of crankshaft,
refer to Technical Data.
If necessary, remove sprocket wheel from crankshaft.
Fit special tool 11 2 383 to crankshaft.
Remove sprocket wheel with special tool 11 2 001 in
conjunction with special tool 11 2 005 and special tool
11 2 004.
Installation:
Shrink-fit sprocket wheel to crankshaft.
Check wedge for correct position.
Heat sprocket wheel with a hot-air blower or on a heating
plate to max. 150
°
C.
Caution!
Do not exceed specified temperature!
RA Replacing crankshaft (M62)
BMW AG - TIS
08.02.2013 21:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
