7 Series E38 735iL (M62) SAL
Remove special tools 11 2 444 / 443 / 442 / 446.
Remove special tool 11 2 300.
Turn over engine once.
Tighten down remaining three screws on exhaust and inlet
camshafts on cylinder bank 5 to 8 firmly.
Tightening Torque,
refer to Technical Data 11 31 3AZ.
Install all oil lines to left and right cylinder heads.
Relieve load on special tool 11 3 390 and remove with special
tool 11 7 380.
Install timing case cover, top right,
refer to 11 14 085.
Install chain tensioning piston,
refer to 11 31 090.
Assemble engine.
RA Replacing right camshaft (M62 up to 9/98)
BMW AG - TIS
08.02.2013 21:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
