Adjusting Camshaft Timing for BMW 7 Series E38 735iL (M62) SAL (M62 VANOS From 9_98)
E53 (X5)
Secure crankshaft with special tool 11 5 180 in TDC firing
position of first cylinder.
Caution!
Remove special tool 11 5 180 before starting engine.
Remove chain tensioning piston.
Remove both timing case covers at top.
Caution!
Left-hand threads.
Release nut (1) on sensor gear screw connection on cylinder
bank 1 to 4.
Remove sensor gear (2) on cylinder bank 1 to 4.
RA Adjusting camshaft timing (M62 VANOS from 9/98)
BMW AG - TIS
08.02.2013 21:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
