7 Series E38 735iL (M62) SAL
Unfasten plug connection on cable duct (1 to 3).
(1)
Knock sensor cylinders (7 and 8)
(2)
Knock sensor cylinders (5 and 6)
(3)
Sensor for cylinder recognition (camshaft sensor)
Disconnect plug connection (1) on tank vent valve.
Unclip wire from brackets on protective tube (1) of positive battery
lead.
Disconnect plug connection (1) on idle speed adjuster and plug
connection (2) on throttle valve potentiometer.
RA Replacing wiring harness section for engine (M60, M62)
BMW AG - TIS
08.02.2013 22:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -