7 Series E38 735iL (M62) SAL
35 51 003
Removing and installing damper for footbrake
lever
Remove lower left trim from instrument panel.
Remove air duct.
Remove glovebox flap.
If necessary, open retaining pin (1) on both ball heads and pull off.
Installation:
Replace retaining pin (1).
Press gas strut off mount and press off footbrake lever.
RA Removing and installing damper for footbrake lever
BMW AG - TIS
09.02.2013 02:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -