7 Series E38 740d (M67) SAL
Withdraw oil-filter element towards top.
Installation note:
Press oil-filter element onto support in oil-filter housing.
Open cover in engine underguard.
Open oil drain plug (1).
Installation note:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 13 1AZ .
Top up engine oil.
Reassemble car and set in horizontal position.
Switch on engine and run at idle until oil indicator lamp goes out.
Switch off engine, wait approx. 10 minutes and then check
engine oil level.
Top up engine oil if necessary.
RA BMW engine oil service incl. supplementary service (M67)
BMW AG - TIS
10.02.2013 02:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -