7 Series E38 740d (M67) SAL
Release banjo bolts (1).
Tightening torque,
refer to Technical Data, 11 65 7AZ
.
Disconnect oil pressure line (2).
Installation:
Replace sealing rings (1).
Release bearing pin (1).
Tightening torque,
refer to Technical Data 11 31 12AZ .
Installation:
The bearing pin (1) is microencapsulated and must be
replaced.
Release screws (1).
Tightening torque,
refer to Technical Data 11 65 1AZ .
RA Removing and installing left cylinder head (M67)
BMW AG - TIS
10.02.2013 02:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
