7 Series E38 740d (M67) SAL
Grip engine hood firmly.
Raise clamps (1) on both sides and slide upwards.
Unhook dampers (2) on left and right of engine hood.
Raise engine hood.
Screw two M8 bolts (1) into engine hood hinges for locking.
Assemble special tool (00 0 200) with special tool
(00 0 201 / 202 / 204 / 208) and attach as illustrated.
Caution!
Supports (1) of special tool 00 0 208 must be forced
together as closely as possible and rest on screws of both
side walls.
Attach special tool (11 0 020) to front and rear engine
suspension lugs and to hook in middle hole.
Raise engine until load is removed from front axle support.
Remove fan cowl,
refer to 17 11 031.
RA Removing and installing, sealing or replacing upper oil sump section (M67)
BMW AG - TIS
10.02.2013 02:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
