Replacing Oil Strainer for Engine Breather (M67) on 7 Series E38 740d
Undo screw (1).
Installation note:
Observe standard tightening torque of M7 screw.
Undo screw (1).
Installation note:
Observe standard tightening torque of M7 screw.
E38 only:
Release locking element on water hose (1).
Detach water hose (1).
Remove oil strainer for engine breather (2).
Installation note:
Replace profile gasket (1).
Install profile gasket (1) dry.
RA Replacing oil strainer for engine breather (M67)
BMW AG - TIS
10.02.2013 02:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
