7 Series E38 740d (M67) SAL
11 21 500
Replacing crankshaft (M67)
(engine removed)
Remove rear end cover,
refer to 11 14 151.
Remove upper oil sump section,
refer to 11 13 510.
Remove all pistons,
refer to 11 25 530.
Loosen screws (1).
Remove intake pipe (2).
Replace seal (2).
Loosen screws (1).
Remove oil pump (2).
Release main bearing bolt connections in sequence 16 ... 1.
Remove struts from main bearing caps 2, 3 and 4.
RA Replacing crankshaft (M67)
BMW AG - TIS
10.02.2013 02:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
