7 Series E38 740d (M67) SAL
Remove right cylinder head cover,
refer to 11 12 006.
Remove vacuum pump,
refer to 11 66 000.
Remove plug (1) from transmission bell housing.
Crank engine at vibration damper with special tool 11 6 480 in
direction of rotation to shortly before TDC.
Continue to crank engine slowly.
Insert special tool 11 2 300 into alignment bore (1) in flywheel.
RA Replacing both camshafts on right (M67)
BMW AG - TIS
10.02.2013 02:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
