7 Series E38 740d (M67) SAL
Insert chain tensioner (1) and tighten down.
Tightening torque,
refer to Technical Data 11 31 8AZ.
Note:
When tightening screws (1), grip camshafts with open-end
wrench.
Tighten down screws (1).
Tightening specifications,
refer to Technical Data 11 31 4AZ.
Unscrew bolt (1).
Remove special tool 11 8 121/122.
Remove special tool 11 2 300.
RA Replacing both camshafts on right (M67)
BMW AG - TIS
10.02.2013 02:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
