7 Series E38 740d (M67) SAL
11 40 000
Checking engine oil pressure (M67)
Disconnect plug (1).
Unclip line (2) from holder.
Release clamp (3).
Release screw (4).
Release clamp (5).
Completely remove air cleaner housing (6).
Unclip line (3) from holder.
Remove hose (4).
Release screw (5).
Remove intake pipe (2).
Release banjo bolt (1).
Tightening Torque,
refer to Technical Data 11 25 7AZ.
Installation:
Replace gaskets (1).
RA Checking engine oil pressure (M67)
BMW AG - TIS
10.02.2013 02:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
