7 Series E38 740d (M67) SAL
11 61 050
Removing and installing intake air manifold
(M67)
Note:
After removing the manifold, it is essential to seal the intake
passages on the cyliner head immediately.
Instructions for disconnecting and connecting battery,
refer to General Information MG 12.
Disconnect battery negative terminal.
Caution!
If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.
Fit charge air hoses without grease and dry.
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Loosen screws (1).
Take off cover (2).
RA Removing and installing intake air manifold (M67)
BMW AG - TIS
10.02.2013 02:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
