bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Alternator (M67)|Page 755 > < 3 RA Checking Alternator And Regulator Switch|Page 753
Page 1
background image

12 31 020

Removing and installing/replacing alternator
(M67)

Warning!

Danger of scalding!

Only perform this work after engine has cooled down.

Note:

Instructions for disconnecting and connecting battery,

refer to General Information MG 12.

Disconnect negative lead on battery.

Remove underbody panelling at front.

Remove fan cowl,

refer to 17 11 031.

Remove alternator drive belt,

refer to 11 28 010.

Release hose clamp (1) on left pressure pipe (2).

Pull out pressure pipe (2).

RA  Removing and installing/replacing alternator (M67)

BMW AG - TIS

10.02.2013  03:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Alternator (M67)|Page 755 > < 3 RA Checking Alternator And Regulator Switch|Page 753