7 Series E38 740d (M67) SAL
Release screws (1).
Tightening torque 13 53 5AZ
Installation:
Note installation position of taper washer (1).
Insert special tool 13 5 422 into exposed tapped hole.
Remove injectors (1) with special tool 13 5 420 or 13 5 230 in
conjunction with 13 5 250 .
Installation:
Before installing injectors, clean injector shafts.
RA Removing and installing/replacing all injectors in fuel injection system (M67)
BMW AG - TIS
10.02.2013 03:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -