7 Series E38 740d (M67) SAL
17 11 031
Replacing fan cowl (M67)
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Release expansion rivet (1).
Carefully open sealing cap (2) a little.
Press together locks on holder (3).
Remove holder (3).
Remove cover (1).
Cut open clamp (2).
Release expansion rivet (3).
Installation:
Replace clamp (2).
Cut open clamp (1).
Remove hose (2).
Installation:
Replace clamp (1).
RA Replacing fan cowl (M67)
BMW AG - TIS
10.02.2013 04:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -