7 Series E38 740d (M67) SAL
17 21 000
Removing and installing/replacing
transmission fluid cooler (M67)
Caution!
Danger of scalding!
Only perform this work after engine has cooled down.
Note:
After carrying out this work, check/top up fluid level in
automatic transmission,
refer to 00 11 500.
Remove and install radiator,
refer to 17 11 000.
Catch and dispose of escaping transmission fluid.
Release screw (1).
Remove profile seal (2).
Installation:
Note installation position of profile seal (2).
Detach flange (1).
Detach ATF lines (2).
RA Removing and installing/replacing transmission fluid cooler (M67)
BMW AG - TIS
10.02.2013 04:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -