7 Series E38 740d (M67) SAL
Hold catalytic converter against turbocharger.
Push clamp (1) over turbocharger and catalytic converter and
press together.
Caution!
It must still be possible to turn the clamp slightly.
Ensure clamp is correctly positioned.
Insert screw (1) down to screw head.
Align clamp so that screw (1) is accessible from above.
Align catalytic converter.
Tighten down screw connections (1).
Install heat shield (3).
Attach retaining clip (2) to heat shield (3).
Install and tighten down screws (1).
RA Removing and installing/replacing left primary catalytic converter (M67)
BMW AG - TIS
10.02.2013 04:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
