7 Series E38 740i (M60-2) SAL
Note:
When the first cylinder is in TDC firing position, the marker
bores of camshafts 1 and 2 are at the top.
Fit special tool 11 2 446 / 442 to camshafts on cylinder bank 5
to 8.
Note:
When the first cylinder is in TDC firing position, the marker
bores of camshafts 3 and 4 are at the top.
Caution!
Do not damage the cylinder head.
If necessary, rework open-end wrench accordingly.
Align all camshafts with open-end wrench in such a way that
special tools 11 2 445 / 441 / 446 / 442 fit on cylinder
heads with no gaps.
RA Removing and installing left cylinder head (M60)
BMW AG - TIS
11.02.2013 06:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
