7 Series E38 740iL (M60-2) SAL
Installation:
Ensure dowel sleeves (1) are correctly located.
Coat contact surface edges of joint between cylinder head
and cylinder head gasket with liquid gasket
Hylomar SQ32 M (refer to BMW Parts Service).
Installation:
Keep sealing faces clean and free of oil.
Replace seals.
Caution!
Note installation direction of gaskets.
Install gaskets with sealing bead (1) facing the timing case
cover.
Installation:
Ensure gaskets are correctly seated, then fit timing case cover
with screw inserted.
Note:
It is not possible to insert screw at a later point.
Installation:
Install all screws.
Fit screws (1) against cylinder head with no clearance.
RA Removing and installing/sealing or replacing top left timing case cover (M60)
BMW AG - TIS
14.02.2013 02:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -