7 Series E38 740iL (M60-2) SAL
Installation:
Replace central screw.
Tighten the central screw with torque.
For tightening torque,
refer to Technical Data 11 23 2AZ
Installation:
Place Special Tool 11 3 460 on Special Tool 11 2 450.
Note:
Special Tool 11 3 460 is magnetic.
Installation:
Select 0
°
location and mark on insertion nut. Tighten the
central screw with torsion angle.
For tightening torque,
refer to Technical Data 11 23 2AZ
RA Removing and installing / replacing hub for vibration damper
BMW AG - TIS
14.02.2013 02:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -