7 Series E38 740iL (M60-2) SAL
Apply light coat of oil to connecting-rod bearing shells.
Place bearing caps in position, making sure that matching
numbers are paired.
Install new connecting-rod screws.
Tighten down conrod bearing with special tool 00 9 120 or with
special tool 11 2 110.
Tightening torque,
refer to Technical Data 11 24 1AZ
RA Removing and installing / replacing all pistons (M60)
BMW AG - TIS
14.02.2013 02:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
