7 Series E38 740iL (M60-2) SAL
11 52 020
Removing and installing or replacing fan
coupling
Caution!
Left-hand threads.
Using special tool 11 5 050 brace against pulley and unfasten
cap nut from water pump using special tool 11 5 040.
Remove fan wheel with fan coupling from water pump.
Installation:
Tighten down fan wheel using special tool 11 5 040.
Tightening torque,
refer to Technical Data 11 52 1AZ
Note:
When using special tool 11 5 040, 30 Nm on the torque
wrench scale are equivalent to a tightening torque of 40 Nm.
Unfasten screws and detach fan from fan coupling.
RA Removing and installing or replacing fan coupling
BMW AG - TIS
14.02.2013 03:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -